Cheap 👍 AIRBOT New DIY Silicone Cable Set (JST-SH / JST-GH / Molex PicoBlade) – Choose Version 🤩

This DIY wiring harness kit takes the guess work out of hunting for the perfect fit for your 4 in 1 ESCs, Flight Controllers, VTXs and Cameras! Stop hoping your have the right pinout laying around and make your own! The combo set has been updated to include more JST GH locking connectors since that’s what is used on DJI Air Units and several other VTX models. 

Choose the correct version for your needs. Available with JST-SH1.0, JST-GH1.25 & Molex PicoBlade 1.25, or just JST-SH 1.0. 

Currently, wires in this DIY Cable set will not fit JST-GH (Locking) connectors.

Check out the rest of our Tools & Building Supplies!  

Features

• Silicone wire – Flexible and wont shrink with heat from your soldering iron!
• Pre-crimped ends on both sides of the wire. 
• Male pieces only, since that is what is used most often in wiring harnesses

JST SH / JST GH / Molex Pico Blade Version Includes

• Double Crimped Silicone Wires 
• 20x 50mm
• 17x 100mm
• 12x 150mm 
• JST-SH (1.0mm Pin Spacing)
• 5x 3 Pin
• 10x 4 Pin
• 5x 5 Pin
• 5x 6 Pin
• 2x 7 Pin
• 2x 8 Pin
• 2x 9 Pin
• 2x 10 Pin
• 2x 11 Pin
• 2x 12 Pin
• Molex Pico Blade (1.25mm Pin Spacing)
• 2x 2 Pin
• 2x 3 Pin
• 4x 4 Pin
• 2x 5 Pin
• 2x 6 Pin
• 2x 7 Pin
• 2x 8 Pin
• JST-GH (1.25mm Pin Spacing w/ lock)
• 2x 2 Pin
• 2x 3 Pin
• 2x 4 Pin
• 2x 5 Pin
• 4x 6 Pin
• 2x 5 Pin
• 4x 8 Pin 

JST SH ONLY Version Includes

• Double Crimped Silicone Wires
• 12x 150mm
• 12x 100mm
• 12x 50mm
• JST-SH (1.0mm Pin Spacing)
• 10x 3 Pin
• 10x 4 Pin
• 4x 5 Pin
• 4x 6 Pin
• 2x 7 Pin
• 2x 8 Pin
• 2x 9 Pin
• 2x 10 Pin
• 2x 11 Pin
• 2x 12 Pin