Firefly Nano Baby 20 is equipped with the most efficient micro motor and the top AIO flight control on the market. It will bring you an unprecedented flying experience. The drone could do all the acrobatic motions smoothly, like diving and power looping.
Check out the rest of our pre-built quads, as well as the rest of our Flywoo selection!
Specifications
- Weight: 33.8g (without battery)
- FC & ESC: GOKU Versatile F405 2S 12A AIO
- Frame: Firefly 2S Nano Baby 20 Analog Frame
- Motors: Flywoo ROBO 1002 15500KV
- Props: Gemfan 2015-2 blade
- VTX: GOKU VTX625 V2 450mW Nano VTX
- Camera: Flywoo 1.2g 1S Nano camera V2
GOKU Versatile F4 5-IN-1 1S AIO FC / VTX
- SIZE: 30x30mm
- Weight: 4.1g
- Hole: 25.5×25.5-3mm
- MCU: STM32F405
- UARTS: 1,2,3,4,5,6
- MOTOR: M1-M4 OUTPUT I2C: SCL/SDA
- GYRO: ICM42688
- Barometer: BMP280
- LED: 2x WS2812
- Flash: 8M
- BEC: 5V 2A
- Firmware: FLYWOOF405S_AIO
Onboard 4in1 ESC
- Built-in 1S/2S 12A BL_S 4in1 ESC
- Support Oneshot125, Oneshot42, Multishot,
- Dshot150, Dshot300, Dshot600
- Input Voltage: 1-2S Lipo
- Firmware: BLHELI_S
- Firmware: Z_H_30_REV16.7
Flywoo ROBO 1002 15500Kv Motor
- Kv: 15500Kv
- Input Voltage: 2S LiPo
- Stator Dimensions: Φ10mm x 2mm
- Shaft Diameter: Φ 1.5mm
- Wire Dimensions: 30AWG x 40mm
- Weight (with wires): 2.4g
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC and PAL(switchable)
- MENU: Support
- IMAGE: 4:3
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio: >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm/F2.5
- Min. illumination: 0.001Lux
- Auto Gain Control: YES
- BLC: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14x14mm
- Wide Power Input: DC 5-25V
- Work Temperature: -20°C~+60C
- Work Humidity: 20%~80%
- Weight: 1.2g (N.W.)
Includes
- 1x Firefly 2S Nano Baby 20 Analog Micro Drone
- 2x set of 2015-2 props
- 1x Screw spare packs
- 2x battery holder
- 4x Prop guards



















Reviews
There are no reviews yet.