Wholesale 🧨 Flywoo BNF Firefly FR 1S Nano Baby V1.2 40mm Quad – Choose Version New 🛒

The Firefly 1S FR is true X variation of the original. It sacrifices some flight time, but has more agility and power! It is perfect for a freestyle ripper. Firefly FR 1S Nano Baby Quad is a 20g ultralight 1S Quad for freestyle and cruising. Through a lot of tests, we found the best configuration for Firefly 1S nano baby quad! Last but not least, it is very quiet, like a mosquito, suitable for both indoors and outdoors.

If you’re looking for a similar platform with longer flight times, try out the Original Firefly Nano Baby! 

Check out the rest of our pre-built quads, as well as the rest of our Flywoo selection!

Specifications

• Weight: 22g
• Props: Gemfan 40MM 1635-3
• Battery Connector: GNB 27 with an adapter to PH2.0

GOKU Versatile F4 5-IN-1 1S AIO FC / 25-250mW  VTX

• Input Voltage: 1S LiPo
• MCU: STM32F411CEU6
• Gyro: MPU6000
• OSD: yes
• UARTs: 2 Sets
• FC Firmware: FLYWOOF411_5IN1_AIO
• ESC Firmware: O_H_5_REV16_8.HEX
• BEC: 5V
• Current Sensor: yes
• Buzzer: no
• ESC Max Continus Current: 5A
• Stack Size: 25x25mm
• Weight: 4g

Flywoo ROBO 0802.4 19500Kv Motor

• Kv: 19500Kv
• Input Voltage: 1S LiPo
• Stator Dimensions: Φ8mm x 2.4mm
• Shaft Diameter: Φ 1mm
• Mounting Pattern: 7mm Φ
• Wire Dimensions: 30AWG x 40mm
• Weight (w/ wires): 1.8g

Flywoo 1S Nano Camera

• Image Sensor: 1/3″ CMOS Sensor
• Horizontal Resolution: 1200TVL
• Aspect Ratio: 16:9
• Signal System: NTSC, PAL
• Lens Size: 1.8
• Minimum Illumination: 0.001Lux @ F
• Input Voltage:1S
• Dimensions: 14x14xmm
• Weight: 1.2g

RunCam Thumb

• Resolution: 1080p@60fps
• Video Format: MP4
• Gyro: Built-In
• Communication Interface: Micro USB
• SD Card Compatibility: 128GB Max
• Power Input: 5V 
• Dimensions: 52x13x19mm
• Weight: 9.8g

Includes

• 1x Flywoo BNF Firefly FR 1S Nano Baby V1.2 40mm Quad
• 2x Sets of Gemfan 40MM 1635-3 Props
• 1x Spare Hardware Set