Coupon 👏 Kotking Water Resistant Electronics 🧥 Coating – 15ml 🧨

Kotking is a clear silicone based water resistant coating for electronics. Kotking is water resistant and designed to dissipate heat, it will not melt off during those full throttle punch outs. When applied properly, Kotking will prevent damage from exposure to liquids.

Check out our other building tools and supplies!

Specifications

• Color: Clear/transparent
• Size: 15mL
• Material: Silicone Based

Includes

• 1x Kotking Water Resistant Electronics Coating – 15ml

Instructions

• Tear down all parts so you can easilly put KOTKING on them, no need to unsolder
• Clean up all surfaces with air blower, brush, or cloth to avoid dust, oil, moist or any other things that cover it
• Apply KOTKING to all components such as flight controller, VTX, camera boards evenly and slowly you can use our tiny brush or wood stick to make them even
• put them in balanced potition and let them dry for about 15-20 mins, and you can do the same for the low side later
• To coat FPV camera you can put KOTKING on camera connector, on camera case especially on connection between case,and FPV camera focus ring
• Do not coat wiring harness connectors
• Do one side at a time or until KOTKING dry and you can do the other side