Best reviews of 💯 New IFlight BNF Protek35 4S 3.5″ Quad W/ Caddx Vista & Polar Camera – Choose Receiver Type 🥰

The iFlight ProTek35 3.5″ 4S HD is now equipped with the Caddx Polar Vista Digital HD System!

After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series. iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with 2205 motors, Beast F7 AIO Flight Controller, 55A 2-6S ESC, and the Nazgul 3535 propellers. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops! 

Our all-new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we’re talking about here… Durable plastic protectors with copper standoffs, portable compact design, easily accessible USB port without disassembly, LED battery status, lost model buzzer, and a universal GoPro TPU for a full-size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.

ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all-new 2203.5 motors for more power and less heat. We were able to increase speed and a lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mode (flip the building upside down) or a lite mod (remove the protective plastic for weight optimization).hrust by 50% compared to its 3inch predecessor which gives a lot more room for a lot more fun. Our GPS measured the maximum speed above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch-outs or light freestyle moves.

Note: Battery, GoPro, and GoPro mount are NOT included.

 

Check out our other pre-built quads, as well as the rest of our iFlight selection!

Features

• High-performance True-AIO Board Beast Whoop F7 AIO 55A v2.0 to save weight and space
• T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
• Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
• Low Resonance frame construction (Less Jello, more Cinematic footage)
• Pre-tuned with smooth freestyle settings
• Caddx Polar Vista Digital HD System
• Butter smooth 2205 3200KV (4S)
• ProTek35 Prop Guards V2.0
• No Props or frame in view!

Pre-Tuned & Pre-Setup:

• Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning were applied for a great flight experience!
• To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”
• Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
• Please check our linked article on “How to disable Angle-Mode, and activate Acro-Mode”

Specifications

Beast F7 V2 AIO FC

• MCU: BGA-STM32F745
• Gyro: BMI270
• Blackbox: 8Mb Onboard Flash
• BEC output: 5V 2.5A
• Barometer: BMP280
• Connector: Micro-USB
• OSD: AT7456E
• FC Firmware：IFLIGHT_F745_AIO
• Mounting pattern: 25.5×25.5mm φ3mm
• Dimensions: 32.5×32.5mm
• Weight: 8.5g

F7 55A 2-6S ESC

• Current Sensor: Yes
• Input: 2-6S LIPO
• Current scale: 200
• Constant: 55A / Burst: 50A
• BLHeli: BLHeli-S
• Telemetry: no
• ESC Firmware: BlheliS G-H-30
• Mounting pattern: 25.5×25.5mm/Φ3mm
• Dimensions: 32.5×32.5mm

 

Includes

• 1x ProTek35 Frame
• 1x Caddx Vista/Polar Digital HD System Kit 
• 2x Albatross LHCP RP-SMA 5.8g antenna
• 1x TPU Bracket for Nebula Nano Air Unit
• 1x TPU Antenna holder
• 2x Nazgul 3535 propeller (Set of 4 – Color May Vary)
• 1x iFlight Lipo Strap 15x150mm (Color May Vary)
• 1x iFlight Lipo Strap 15x250mm (Color May Vary)
• 1x GoPro TPU bottom stand black (GoPro Protector not included)